Bosnia(BA)English (United Kingdom)
Print
PDF

Arcelor Mittal Zenica Coke Plant

 

Engineering, projecting, equipment and material supply, delivery, setting into motion, commissioning and monitoring of automation and instrumentallization at the complete COKE PLANT and Byproduct plants.SIEMENS PCS 7 (Process Control System 7 – Totally Integrated Automation)

 

TECHNICAL DESCRIPTION

Suggested solution was the replacement of the existing equipment for measurements and regulation, with a new, modern equipment of renowned company.

 

Entire coke plant is conceptualized through following technological units:

- coal preparation

- coke separation

- coking and stations for gas mixing

- extractors and pump condensate station

- flare stack

 

Coke plant control is done with SIEMENS DCS systemPCS 7 v7.0. As controlling processes we used three SIEMENS

controllers from S7-400 family, type 417-4H-2DP. Because of the technology process setting, some of

technological units are solved autonomous with autonomous controllers from SIMATIC S7-300 family,

and the information is forwarded to central system. Those autonomous units and controllers are:

coal unloading - CPU 315-2DP, pump station – CPU 315-2DP, position of machines for coke pushing and

transfer- 4•CPU 315 2PN/DP. One of the controllers operates with coal preparation and coke separation, while

the other two controllers redundantly operate with coke furnaces, station for gas mixing, gas coolers, electro

filters, extractors and condensant pump station. Measurements from the flare stack are introduced in controller

that controls coke furnaces, and controlling of the tower for coke quenching is realized with the controller that

controls coking. Collecting of the measurement and controlling signals is done locally through plant by module

type ET200M and with PROFIBUS introduced to process controllers. Because of better reliability and sensitivity

reduction of the system to mistakes, PROFIBUS network for measurements supply is realized with redundant ring

with optical cable. Visualization and control is constructed in client-server architecture. For servers we used two

PCS7 redundant industrial servers, type PRIMERGY RX10054. The servers work parallel and are backup to one

another. In case of outage of one of the servers, the system continues to work with the correct server. After

returning to the system of incorrect server, automatic data update between servers is done for the period while

one of them was not working. The servers are secured by UPS energizing and cooling. Redundant energizing

is also secured for process controllers.

 

 


BEFOREREALIZATIONAFTER
Thumbnail imageThumbnail imageThumbnail image
Thumbnail imageThumbnail imageThumbnail image

 

Thumbnail imageThumbnail image
Thumbnail image
Thumbnail imageThumbnail image
Thumbnail image

 

Thumbnail imageThumbnail imageThumbnail image
Thumbnail imageThumbnail imageThumbnail image

 


Thumbnail imageThumbnail image

Thumbnail image